RUPES LHR15 ES BIGFOOT RANDOM ORBITAL POLISHER LUX KIT

INCLUDED IN THE KIT:
LHR 15ES – RANDOM ORBITAL POLISHER (Ø125MM – Ø6” – 15MM ORBIT)
COD. 9.DACOARSE – D-A COARSE POLISHING COMPOUND 250ML
COD. 9.DAFINE – D-A FINE POLISHING COMPOUND 250ML
COD. 9.PROTECT – UNO PROTECT ONE-STEP POLISH & SEALANT 250ML
COD. 9.BW150H – COARSE WOOL PADS Ø130-145MM
COD. 9.BW150M – FINE WOOL PADS Ø130-145MM
COD. 9 .DA150H – D-A COARSE FOAM PADS Ø130-150MM – Ø5”-6”
COD. 9.DA150M – D-A FINE FOAM PADS Ø130-150MM – Ø5”-6”
COD. 9.BF9010/4 – 4X COLORED MICROFIBER CLOTHS
COD. 9.BF7001 – PAD REMOVER ACCESSORY
COD. 9.Z1024 – CABLE CLAMP
COD. 9.Z868 – BIGFOOT APRON
COD. 9.Z1043/BF – BIGFOOT DUFFEL BAG

LHR15 ES RUPES BIGFOOT RANDOM ORBITAL POLISHER

The Ø 15 mm orbit and RUPES Ø 125 mm backing pad make the random orbital polisher particularly suitable for curved surfaces.
The 15mm orbit of the LHR 15ES, shorter than that of its bigger brother LHR 21ES, is coupled with a higher RPM level than the LHR 21ES.
This increased speed gives the LHR 21ES a cutting power equivalent to the LHR 15ES, despite the smaller orbit.
Its Ø 130/150 mm BigFoot polishing foam pads, perfect balance, and
vibration-free operation make the LHR 15ES a true gem and a must-have for every detailer's tool kit.

ERGONOMICALLY PERFECT
RUPES R&D and Design departments paid special attention to the design and ergonomics of the BigFoot polishers.
The perfectly balanced machine body, practical grip, quiet operation, and
minimal vibrations are just some of the features that contribute to making BigFoot the most versatile and sought-after polishing system.

ANTI-SPINNING SHROUD
The dual-function anti-spinning shroud is designed to protect the operator against moving parts and act as a clutch for the backing pad,
preventing additional stress on the foam polishing pad when it is not in direct contact with the surface.

ELECTRONIC SPEED CONTROL MODULE
The speed control on the handle is practical and easy to use.
The polisher's speed can also be adjusted during use, thus avoiding any interruption to the polishing operation.