RUPES POLISHING LHR12E STD ELECTRIC BIGFOOT DUET

Description

A single system for grinding and polishing.
The duet and ‘designed to work equally well with soft interface pad and microabrasivi,
with both pads for polishing with excellent results in both modes’.
Careful studies on the dynamics of orbital motion and thorough practical tests have led to the choice of an eccentricity ‘6mm (total 12mm orbit);
the ability ‘of the latest generation microabrasivi discs is incredibly enhanced correction,
In particular operand on the flattening of orange peel or extended defects with great homogeneity ‘of the depth’ of the polishing tracks.
The same movement orbital guide then the polishing pads in an effective action
and incredibly easy it coming rapidly to very high levels of finish.
The use of microabrasivi discs for the correction of more ‘important defects speeds up and simplifies the polishing cycle
reducing a few minutes interventions that would otherwise be very tiring if realized mode ‘only polishing.
This process requires machines with an accurate balance and excellent control of the movement;
small variations can lead to a roughness’ non-homogeneous surface which then requires hard work in the later stages.
The duet is guided docilely immediately creating a good feeling with the operator.
In particular, we notice some measures that contribute to a good result as the anti-spinning device that limits the possibility ‘of errors
also to less experienced operators, the front handle which facilitates the support of at the virtual center of the palm of your hand
the eccentric mass and the electronic module with torque control
In addition, the rubber support allows to place the bench duet avoiding contamination by abrasive powders that
They might accidentally be transported to the work surface, ruining them.

Technical data:
ATTACK M8
SPEED CONTROL
WEIGHT 2.6 KG
R.p.m. 4000-5500
POWER W / 400 HP
Ø 12 MM ORBIT
Ø PLATORELLO MM 125

Additional information

Brand

RUPES