PALINAL 873.GT05 ACRYLIC B / B LT GRAY 1

Description

It is a multi-purpose wet on wet but can ‘be used as a filler to sand average fund. Suitable for both be overpainted with water enamels and solvent. There also exists in white or black version 873.GT11 873.GT22

It can be applied directly to electrophoresis also unsandpapered.

It has excellent characteristics in terms of:
a) VERTICALITY ‘is easily applied without the risk of sagging.
b) RAPIDITY ‘You can’ overcoated gia ‘after 10’ and it is possible to intervene by sanding small impurities (nibs, imperfections, etc.).
c) POWER FILLER Similar to that of a sanded down.
d) ABSENCE OF contour mapping The filled areas are not highlighted
e) RELAXING The enamel shows a mirror-like appearance even in the wet-on-wet bottom 873.GT05
f) NO INPUT The enamel shows a full and brilliant appearance even in the version of the wet surface wet.

APPLICATION GUIDE

Apply 1 or 2 coats of 873.GT05 spacing Fund single pass 5 ‘to 20grC.
Wait approximately 15 ‘to 20grC and then apply the final polish both solvent (ns. 2K pastel class, 807, 907.910, 920 or double layer 821, 823, 824, 925, 926, 927) + transparent (or 823 ns.serie 923) or water (ns. HYDROPAL 120 is in the double-layer version pastels, metallic and pearl both in pastel verisone 2K direct gloss).

Once dried the glazes according to the indications of the respective technical specifications, the final aesthetic appearance and ‘equal to that of a glaze applied on a sanded bottom.

In the presence of any impurities ‘the Fund may’ be sanded with P1000 paper gia ‘after 15’.

Using it as a traditional fund you can ‘sand with P800 paper after 2h at 20grC or after 15’ to 60grC.

Additional information

Brand

PALINI